The Whole New Sound Reference Experience - regardless of price

eAR power amplifier, HANDMADE TO ORDER

Specifications

The output impedance is extremely low, far lower than any amplifier using another technology and it is properly the lowest in the World. It means a far higher damping factor than any Solid State and tube amplifier.

The dynamic range of the A-series is also extremely high and is truly high-end: 117dB.
Compared to for example the dynamic range of Super-Audio-CD (SACD) players: 108dB
Check out solid state amplifiers and you may see it is uncommon to see amplifiers with a dynamic range better than 100dB.

The distortion of the eAR Music Series is extremely low, just 0.009% when playing with 100 WATT RMS.

 

eAR One MKII power amplifier	1-channel mono-block Power Amplifier with ICEpower® Technology.
Performance level	The FLAGSHIP power amplifier that resets the standard for any mono-block  power amplifier in the world.
Max. power output (RMS)	1 x 300W / 8Ω, 1 x 600W / 4Ω
Power stage efficiency	93%, 300W / 8Ω(only ICEpower)
Peak output current	>100A (peak power into 0.6 ohm = 7000 Watt)
Output impedance	1mΩ @ 1kHz
Dynamic range (A-weighted)	>119dB
THD+N	0.009% 100W @ 8Ω
Linearity	10Hz - 20kHz: +- 0,2dB
Bandwidth	10Hz - 70kHz
Input sensitivity (full output)	2V RMS
Inputs, selectable	Balanced XRL and single-ended RCA
Output	A pair of touch proof WBT
Dimensions (WxHxD)	380x130x280 mm
Shipping weight	12kg / each

All features and data refer to specific type numbers. Other variants are available. Subject to change without notice.


The new eAR power amplifiers, MKII
Aiming to meet the uncompromising expectations of our users all over the world, we continuously strive to develop and improve the well-known build quality. This is why the internal build quality of the eAR power amplifiers has been improved. Further, the connector cave to the eAR power amplifiers has been improved. All connectors of the new connector cave have been re-arranged. It is now easier to access the connectors. All interconnects may have large size too.

Pictures of the eARTwo MKII connections
Two single-ended RCA inputs are placed between the two balanced XLR inputs. There is a switch to select between the XLR/RCA inputs. The touch proof WBT 660cu spades are used to the Acoustic Reality Jewel™ no. 6 speaker cables (the wire is handmade of 99,99% pure flatmade silver with oval Teflon tube isolation). The power cord with the ICE connector is our CryoPhon™ power cord, it is a power cord that is fully shielded.

Speaker cables with touch WBT 660cu spades MUST be used. The touch proof WBT 660cu spades can handle thick cables too.

The eAR amplifiers can easy handle a load of only 2 ohm or even 1 ohm electrostatic speakers (verified too), which means all type of loudspeakers can be used.


Adjustments and maintenance
Remove finger prints with soft cloth. A spray with stainless steel cleaner can be used to remove finger prints too. There is no further adjustments or maintenance of eAR amplifiers.


Safety and EMI
The eAR amplifiers are CE marked. All international EMC/EMI requirements are meet too.

To meet all international safety and therefore to be able to sell the eAR power amplifier in countries all over the world we have chosen to use touch proof connectors.

eAR One MKII and eARTwo MKII
Speaker cables with original touch proof WBT spades from the WBT safety line must be used.